Purge gas systems

Do you need to inert your pipes? Are you looking for a simple solution to hold your soluble paper in position?

The AQUASOL adhesive tape is totally water soluble. It allows to maintain the soluble paper on the inner walls of a stainless steel or steel pipe. Roll size 5 cm x 92 m.

Sold in rolls. Order now and receive your material in 24 H in France and Europe.

Looking for a quick solution to create an inerting chamber in a pipe? Need an accessory that leaves no trace?

AQUASOL water soluble paper or rice paper for pipe fitters is used to create inerting chambers. Suitable for welding pipes (mainly stainless steel), it is widely used in the chemical, petrochemical, gas and district heating sectors.

Sold by the metre in 78 cm width.

Delivery in France within 24 hours by DHL.

The pipe stopper is used to temporarily prevent the flow of gas or liquid.

Quick and easy to install. The peripheral seal expands when tightened with the central screw. Steel body design for greater rigidity and durability.

Choose your plug model according to the internal diameter of the pipe.

Packaged individually.

Delivery in France within 5 days.

Inflatable balloons for 1 - 14 inch pipe inerting.

Huntingdon Fusion Technique HFT® is re-launching a revolutionary inerting system with a new design that allows you to increase the quality of your welds at low cost. This new simplified design has significantly reduced manufacturing costs without compromising the quality of materials used in the manufacture of inflatable inerting systems.

The PurgElite® consists of two inflatable bladders covered with a flame retardant fabric, connected by a flexible hose that can withstand high temperatures.

Sold individually (consisting of 2 connected balloons). Delivered without accessories.

Order now and receive your product within 48/72 H in France and Europe.

Pressure regulator compatible with PurgElite inerting tanks. required for system operation.

Prevents gas overpressure and risk of bursting of purge tanks.

Sold individually

12 mm F/F straight connector for PurgElite inerting tank essential for system operation.

It can also be completed with hose and a PurgeGate pressure regulator.

Designed specifically for thin gauge stainless steel welding, the Backside Support Adhesive bonds to the backside of the weld to support the first pass and the weld pool. This technique allows the argon gas emitted by the welding torch to remain around the weld pool, eliminating the need for backside inerting, while providing a consistent high quality bead profile. The aluminum tape is 75 mm wide. It has a 25 mm wide woven, heat resistant glass fiber tape in the center. The fiberglass tape is dense, weighing 1000 grams per square meter. The 80 amp tape is supplied in 25 meter rolls, and the 160 and 240 amp tape is 12.5 meters long.

The Argweld® PurgEye® 100 IP65 portable Weld Purge Monitor® measures from atmosphere (20.94%) to 100 ppm (0.01%) residual oxygen. It offers an instant, safe and accurate reading of residual oxygen.

Ideal for work on stainless steel, it allows to know when the inertness of the weld is good enough to weld. It allows to check that there is no loss of inertness during welding. The sensor has a lifetime of more than 18 months (an indicator will be displayed) and is replaceable by yourself, spare sensors are available.

This device has a calibration system that is activated by a button on the front panel.

Transparent PVC hose for any use with temperature between -15°+60°.

Suitable for the distribution of neutral gases such as Argon or Nitrogen.

Packed in 50 m coils. Price per meter with a minimum order of 10 m.

Flame retardant cotton plugs provide protection during welding. These safety balloons are used to retain flow, but are not intended to retain pressure.

Input : 1/4" Gas Female. Diameters range from 1 - 14" (always in stock) and bigger (ask for quotation)

Need more information ? Feel free to call us.

Delivery throughout Europe in 24h/48h with DHL Europe Express service.

This ready-to-use kit includes : Flexible unit 2 m with 1/4 "valve, one regulator and inflatable shutter ballon <Ø450 (18")

Select the right model according to the inner diameter of your pipeline.

Order NOW and get your product in 24/48 H with DHL Europe Express Service.

The Purge Flex case features a dual-packaged purge system that operates in intervals of 26 mm to 165 mm.

Purge Flex can easily pass through pipes and elbows without tilting. The system design also ensures that at least one disc is confirmed, which will reduce purge time and inert gas usage.

Silicone Discs are resistant to temperatures up to 320 °C.

Free delivery everywhere in France.