Français
_11zon.webp){kind=icon}
_14_11zon.webp){kind=icon}
_6_11zon.webp){kind=icon}
There are no more items in your cart
Spout S1 In Brass
13590
€7.75
TTC
The Le Lorrain S1 brass welding tip is designed for welding torches operating with a mixture of oxygen and acetylene. This single-jet tip is available in seven flow rates, ranging from 250 to 1,000 l/h, allowing the flame to be matched to the thickness of the steel and the work to be performed.
Get register and you will earn 8 points/€0.40
(Each €1.00 spent = 1 point, 1 point = €0.05 discount).Your cart will total 8 points that can be converted into a voucher of €0.40.
Availabilities for Pick-up in store :
Single-jet tip for S1 oxygen/acetylene welding torch
Thanks to its 12 x 150 thread, this tip fits compatible Le Lorrain S1 torches. Its brass construction makes it suitable for servicing, replacing or equipping a professional oxy-acetylene welding torch.
The required flow rate must be selected from the list of available options before adding the product to the cart. Each flow rate corresponds to an indicative steel thickness range and filler rod diameter recommended by the manufacturer.
Flow rates, part numbers and welding capacities
| Tip flow rate | Part number | Indicative steel thickness | Steel filler rod |
|---|---|---|---|
| 250 l/h | 015411 | 1.6 to 2.5 mm | Ø 1.6 mm |
| 315 l/h | 015412 | 2.5 to 4 mm | Ø 2 mm |
| 400 l/h | 015413 | 4 to 5 mm | Ø 2.4 mm |
| 500 l/h | 015414 | 5 to 6 mm | Ø 3 mm |
| 630 l/h | 015415 | 6 to 8 mm | Ø 4 mm |
| 800 l/h | 015416 | 8 to 10 mm | Ø 4 mm |
| 1,000 l/h | 015417 | 10 mm | Ø 4 mm |
Le Lorrain S1 tip specifications
- Type: single-jet tip for welding torch
- Manufacturer: Le Lorrain
- Compatibility: Le Lorrain S1 torch
- Gases used: oxygen and acetylene
- Available flow rates: 250, 315, 400, 500, 630, 800 and 1,000 l/h
- Thread: 12 x 150
- Material: brass
- Specified dynamic oxygen pressure: 1.5 bar
- Specified dynamic acetylene pressure: 0.5 bar
- Standard specified for the product range: ISO 5172
- Manufacturing: made in France
How to choose the S1 tip flow rate
The tip flow rate should primarily be selected according to the thickness of the steel to be welded. A flow rate of 250 l/h is suitable for thicknesses ranging from 1.6 to 2.5 mm, while the 630 to 1,000 l/h models meet welding requirements for thicknesses of up to 10 mm.
It is important to select a tip suited to the work being performed in order to obtain a correctly sized flame and maintain control over the heat input.
Safety advice: only use this tip with a compatible oxygen/acetylene system fitted with suitable pressure regulators and flashback arrestors. Pressures must be adjusted in accordance with the manufacturer’s instructions and the operating conditions.
Discover our other welding torch nozzles and tips.
13590
Documentation
Useful documents to help you prepare for installation and use.
No documents are available at the moment.