Français
_11zon.webp){kind=icon}
_14_11zon.webp){kind=icon}
_6_11zon.webp){kind=icon}
There are no more items in your cart
Infinity PipeCut System & Bevel by Exactools - OD 380 - 1850 mm
53200
€8,280.00
TTC
The Infinity Cut+Bevel is an innovative system that allows cutting and beveling large diameter pipes (360 mm and above) in a single operation.
Get register and you will earn 8280 points/€414.00
(Each €1.00 spent = 1 point, 1 point = €0.05 discount).Your cart will total 8280 points that can be converted into a voucher of €414.00.
Availabilities for Pick-up in store :
Cutting and bevelling large-diameter pipes
Exact Infinity Cut+Bevel — Pipes from Ø 360 mm
The Exact Infinity Cut+Bevel combines cutting and bevelling of cast iron and plastic pipes. Designed for outside diameters from 360 mm, it uses a segmented chain gripping system to adapt the clamping arrangement to the pipe’s circumference. Its cutting depth adjustment allows the cut to be matched to the pipe wall.
Combined Cutting and Bevelling
The Diamond Cut+Bevel 165 blade and its dedicated guard combine cutting and bevel preparation in a single operation. This configuration reduces working steps on compatible cast iron and plastic pipes.
Segmented Chain Clamping
The chain segments connect to adapt the system to the pipe diameter. The tensioning device with crank handle allows the saw’s clamping to be adjusted. The required chain length depends on the circumference to be covered.
Adjustable Cutting Depth
The adjustment mechanism allows the cutting depth to be matched to the wall thickness. It helps prepare work on multilayer pipes, using a blade appropriate for the material.
Two Operating Speeds
The machine offers two no-load speeds: 1900 rpm in the low setting and 2885 rpm in the high setting. Selecting the speed and blade allows cutting to be adapted to the task.
Technical Specifications
- Model: Exact Infinity Cut+Bevel
- Pipe outside diameter: from 360 mm
- Clamping: segmented chain with tensioning device
- Mounting bore: 62 mm
- No-load speeds: 1900 / 2885 rpm
- Stated cutting wall thickness for steel: 12 mm with the 120 V version, 20 mm with the 230 V version
- Recommended generator capacity for the 230 V version: 4.9 kVA
- Recommended generator capacity for the 100–120 V versions: 3 kVA
Materials listed for cutting, with a suitable blade: aluminium, cast iron, copper, ductile iron, glass fibre and plastic. The combined bevelling application described applies to cast iron and plastic pipes.
Kit Contents
- Exact PipeCut motor unit with pre-installed Cermet 165 blade
- Diamond Cut+Bevel 165 blade
- Dedicated blade guard for bevelling
- Tensioning device with crank handle
- Chain segments: 2 × 2 m, 1 × 1 m, 1 × 0.5 m, 2 × 0.2 m and 1 × 0.1 m
- Exact PipeCut carrying bags
- 5 mm and 2 mm Allen keys attached to the saw
- Operating instructions
Why Choose This Model?
Adaptable Clamping for Large Diameters
A segmented chain system for preparing large pipes, with depth adjustment and supplied cutting and bevelling equipment.
- Diameters from 360 mm
- Cutting and bevelling of cast iron and plastic
- Adjustable cutting depth
- Cermet 165 and Diamond Cut+Bevel 165 blades included
53200
Documentation
Useful documents to help you prepare for installation and use.
No documents are available at the moment.