Français
_11zon.webp){kind=icon}
_14_11zon.webp){kind=icon}
_6_11zon.webp){kind=icon}
There are no more items in your cart
FEIN STS 325 R Pneumatic Reciprocating Saw – Spark-Free Cutting up to Ø 440 mm
53399
€3,631.20
TTC
Cut with confidence, even in the most sensitive environments. The FEIN STS 325 R pneumatic saw delivers fast, spark-free cold cuts, ideal for pipes up to 440 mm and profiles up to 290 x 500 mm. Order now and stay safe on every job.
Get register and you will earn 3631 points/€181.55
(Each €1.00 spent = 1 point, 1 point = €0.05 discount).Your cart will total 3631 points that can be converted into a voucher of €181.55.
Availabilities for Pick-up in store :
Pneumatic sawing for pipes, profiles and dismantling work
FEIN STS 325 R Pneumatic Reciprocating Saw — 1100 W
The FEIN STS 325 R supports cutting operations in maintenance, installation and industrial dismantling. Powered by compressed air at 6 bar, it delivers a power output of 1100 W with a 60 mm stroke length. Its stated capacities reach 440 mm in diameter for pipes and 290 × 500 mm for profiles, with a suitable blade and clamping device.
Pneumatic Drive
The saw operates at a pressure of 6 bar with a stated air consumption of 1.5 m³/min. The compressed air system must provide the necessary flow rate and pressure for operation.
60 mm Stroke at 330 Strokes per Minute
The reciprocating action allows pipes, profiles, solid materials and multilayer sandwich materials to be cut. Selecting an appropriate blade adapts the cut to steel, cast iron, ductile iron, cement or plastic.
Clamping and Feed for Guided Cutting
Suitable clamping and feed devices help guide the saw during cutting. Mitre cuts up to 45° are possible, depending on the supports used and the geometry of the workpiece.
Cold Cutting for Industrial Operations
Cold cutting limits heat input compared with thermal cutting. With an EPTA weight of 7.2 kg and a supplied handle, the STS 325 R is designed for cutting industrial installations and components.
Technical Specifications
- Model: FEIN STS 325 R
- Operating pressure: 6 bar
- Air consumption: 1.5 m³/min
- Power output: 1100 W
- Stroke rate: 330 min⁻¹
- Stroke length: 60 mm
- Stated maximum pipe diameter: 440 mm
- Stated maximum profile dimensions: 290 × 500 mm
- EPTA weight: 7.2 kg
Clamping: the described clamping device accommodates pipes from Ø 80 to 400 mm with a chain extension. This range differs from the saw’s maximum cutting capacity. Check which accessories are required for your application and whether they are included in the configuration ordered.
Stated Noise and Vibration Emissions
- Sound pressure level LpA: 81 dB(A)
- Sound power level LWA: 92 dB(A)
- Peak sound pressure level LpCpeak: 102 dB(C)
- Noise uncertainty K: ±3 dB
- Three-axis vibration value: 7.1 m/s²
- Vibration uncertainty K: ±1.5 m/s²
Included Accessories
- 2 saw blades
- 1 chuck key
- 1 handle
- 1 hose connector
Why Choose This Model?
A Pneumatic Solution for Industrial Cutting
A reciprocating saw for installations with a suitable compressed air supply. Pneumatic drive and cold cutting do not constitute ATEX certification or guarantee spark-free operation.
- 1100 W power output
- Pneumatic supply at 6 bar
- 60 mm stroke — 330 strokes/min
- Pipes up to Ø 440 mm, depending on configuration
53399
Documentation
Useful documents to help you prepare for installation and use.
No documents are available at the moment.