Français
_11zon.webp){kind=icon}
_14_11zon.webp){kind=icon}
_6_11zon.webp){kind=icon}
There are no more items in your cart
STAHLWERK MIG MAG 200 ST Digital Welding Machine – Full Equipment Pack
53493
€501.19
TTC
€618.75
Essential accessories
Power, precision, and versatility. Featuring 200 A output, spot welding mode, synergic wire feed, and compatibility with MIG/MAG, FLUX, and MMA.
Get register and you will earn 501 points/€25.05
(Each €1.00 spent = 1 point, 1 point = €0.05 discount).Your cart will total 501 points that can be converted into a voucher of €25.05.
Availabilities for Pick-up in store :
Synergic MIG/MAG, FLUX and MMA package
STAHLWERK MIG MAG 200 ST Digital with Accessory Package
This package combines the MIG MAG 200 ST Digital with an AK 15 torch, cables, consumables, a helmet and a gas regulator. Powered by a single-phase 230 V supply, the welder delivers 45 to 200 A in MIG mode and 20 to 180 A in MMA mode, with gasless welding possible using suitable flux-cored wire.
Automatic Synergic Wire Feeding
Wire speed adapts to the selected current to simplify adjustment. Interchangeable rollers cover wire diameters from 0.6 to 1 mm, while the digital display makes parameters easy to read.
Spot Function and 2T / 4T Modes
Spot mode makes tack welding on thin sheet metal and bodywork easier while limiting distortion. The 2T and 4T modes allow the cycle to be adapted to short or prolonged welds.
MIG/MAG, FLUX and Stick Welding
Choose gas-shielded MIG/MAG, gasless FLUX or MMA to suit the task. The supplied 0.8 mm ER70S-6 SG2 steel wire is intended for gas-shielded welding; suitable flux-cored wire is required for FLUX mode.
Compact and Practical to Use
The 10.9 kg welder measures 490 × 210 × 390 mm. An LED illuminates the wire guide, while IGBT technology, intelligent cooling and thermal protection complete the equipment, which has an IP21S protection rating.
Main Accessories Included
- AK 15 torch with 3 m hose assembly
- Electrode holder and earth clamp with 3 m cables
- 5 m gas hose, quick connector and gas regulator
- Professional welding helmet
- 0.8 and 1 mm contact tips, V-type and K-type rollers
- 28-piece 15AK consumables kit
- Spool of ER70S-6 SG2 steel wire, Ø 0.8 mm
- Spanners, wire brush, chipping hammer and protective cover
Power supply: single-phase 230 V AC, 50/60 Hz. Stated certification: TÜV Rheinland; standards EN 60974-1 and EN 60974-10.
Why Choose This Package?
A Versatile Welder with Accessories
A package for workshop and maintenance tasks, with synergic adjustment, a Spot function and equipment for MIG/MAG and MMA welding.
- MIG: 45 to 200 A / MMA: 20 to 180 A
- Compatible with gasless FLUX welding
- Spot function and 2T / 4T modes
- Torch, helmet and gas regulator included
53493
Documentation
Useful documents to help you prepare for installation and use.
No documents are available at the moment.