Plasma cutting

Extend the lifespan and boost the performance of your plasma torch with the STAHLWERK P-60 wear kit – 30 robust and precision-engineered parts for clean, reliable cuts.

Ensure clean and consistent plasma cuts with the STAHLWERK guide wheel – solid brass construction, easy to use, and designed for pilot arc systems.

Achieve clean, precise circular cuts with the STAHLWERK P-60 cutter – lightweight, magnetic, and ready to use in seconds.

Optimized for precise metal removal and shallow gouging profiles, this cartridge is ideal for light material washing. Compatible with SmartSYNC torches (Powermax45/65/85 SYNC) and Duramax torches (with adapter for Powermax45 XP/65/85), it ensures precision and versatility for your professional tasks.

Optimized for precise gouging and shallow profiles, this cartridge is ideal for light material washing applications. Compatible with SmartSYNC torches (Powermax105 SYNC) and Duramax torches (with adapter for Powermax105), it ensures performance and versatility for your professional tasks.

Designed for intensive metal removal and deep profiles, this cartridge is perfect for demanding applications. Compatible with SmartSYNC and Duramax torches, it delivers reliability and optimal performance.

Optimize your gouging work with this powerful cartridge designed for intensive metal removal and deep profiles. Compatible with SmartSYNC and Duramax torches, it is perfect for the most demanding applications. Reliability and performance guaranteed!

FlushCut™ cartridges provide precise, close-to-base cutting for raised elements without damaging the parts. Available in 65 A, 85 A, and 105 A, they are compatible with SmartSYNC® torches for Powermax65/85/105 SYNC systems.

Optimized for cutting metals up to 6 mm (1/4 inch) thick, this cartridge ensures precision, durability, and performance. Compatible with SmartSYNC® and Duramax® torches, it provides an ideal solution for clean and efficient cuts on Powermax systems.

Powermax 105 Duramax torch, 75° angle, 7.6 m (25 ft) cable

Drag-cutting and FineCut cartridges are optimized for cutting thicker metals up to 32 mm (1 1/4"). To extend cartridge life and performance, it's important to select cartridges optimized for the workpiece.

Drag-cutting and FineCut cartridges are compatible with:

• SmartSYNC™ torches for Powermax SYNC™ systems;
• Duramax® torches using a torch adapter for Powermax® systems.

Diffuser for HYPERTHERM Powermax 45 XP

Operating range: 10 A–85 A

Shield for HYPERTHERM Powermax 45XP

Operating range: 15 A–85 A

Shield for HYPERTHERM Powermax 105

Operating range: 85 A–105 A

SWIRL RING diffuser for POWERMAX 30XP plasma cutter.

Operating range: 15A–45A

Protective nozzle for Powermax 30XP plasma cutter

Operating range: 15A–30A

Shield for HYPERTHERM Powermax 30 XP.

Operating range: 15 A–30 A

The Hypertherm wheel kit is complete and pre-assembled for greater mobility, allowing easy movement of the Powermax 105 plasma cutting system.

Air filtration kits are sold with a one-micron filter to protect plasma cutting systems from contaminated air, and a moisture separator with automatic drain that filters water and humidity from the air lines.

Diffuser for HYPERTHERM Powermax 30 AIR

Nozzle for HYPERTHERM Powermax 30 Air

Operating range: 15A–30A

Electrode for HYPERTHERM Powermax 30 Air

Operating range: 15A–30A

Protector for HYPERTHERM Powermax 30 AIR

Operating range: 15A–30A

Electrodes for HYPERTHERM Powermax 45

Diffuser for HYPERTHERM Powermax 45

Nozzle for HYPERTHERM Powermax 45

Protection nozzle for HYPERTHERM Powermax 45

Protector / Deflector for HYPERTHERM Powermax 45

Equip your Powermax 105XP plasma torch with this Hypertherm diffuser designed for manual cutting applications from 30 to 105 A. A genuine component made for the Duramax Lock 105XP hand torch, helping maintain reliable and consistent cutting performance. Sold individually.

Electrode for DURAMAX hand torch, fitted to Powermax 45XP / 105 HYPERTHERM

Operating range: 10A–105A

Nozzle for Powermax 105 HYPERTHERM

Operating range: 85 A–105 A

Shield nozzle for HYPERTHERM Powermax 30 AIR

Operating range: 15 A–30 A

The STAHLWERK CUT 50 P plasma cutter is a powerful and highly compact cutting inverter (5 kg), designed for precise cutting of electrically conductive metals. Equipped with HF pilot arc ignition (non-contact), it enables clean cuts up to 15 mm thick.

Extreme precision and 100 A of cutting power: the STAHLWERK CUT 100 P is the ideal digital plasma cutter for industrial high-performance cutting. CNC-ready, HF pilot ignition, smart cooling, and full equipment included. Built to deliver.

The Powermax45 SYNC is an innovative plasma cutting machine designed for gouging, cutting, and marking. Featuring a patented cartridge, up to 5 times longer consumable life, and unmatched performance, it delivers simplicity, productivity, and reliability. Perfect for demanding professionals, it combines versatility and efficiency in a robust and easy-to-use system.

Plasma Cutting System HYPERTHERM Powermax 45 XP, 380 V TRI equipped with a 6.5 m torch. Designed for cutting steel, stainless steel, and aluminum with thicknesses ranging from 1 to 22 mm. Suitable for 90% of industrial and artisan applications. Easy to set up and very user-friendly: the work is done by keeping the torch in direct contact with the material to be cut. Consumables can be changed without tools. The system and torch are equipped with effective safety features in case of wear or defects.

BESTSELLER product from HYPERTHERM - the market leader in plasma cutters.