Field pipe welding

Optimize your magnetic field measurements with the FIM1-4 Set. This portable device ensures exceptional precision across three measurement ranges (20 mT, 200 mT, and 2,000 mT) with a resolution of 0.01 mT. Operating on mains power, batteries, or an accumulator, it is ideal for mobile and extended use.

STRONG HAND TOOLS magnetic square.

Able to hold metal parts at 30/60°, 45°, 90°.

Dimensions: 150 x 130 x 35mm / Weight: 1.4kg

Made of metal / Sold individually 

Bring accuracy to every layout job with this 305 mm combination square built for workshops, metal fabrication, maintenance and welding preparation. With its graduated blade, square head, protractor head, centre head, spirit level and scriber, it gives professionals a versatile tool for measuring, marking, checking angles and preparing clean assemblies.

STRONG HAND TOOLS magnetic square.

Able to hold metal parts at 45 or 90 degrees.

Dimensions: 11.1 x 9.5 x 2.5cm / Weight: 0.7kg

Made of metal / Sold individually 

Locking C-Clamp with swivel pad from STRONG HAND. 

Overall length : 460mm / Throat depth : 254mm

Maximum clamping capacity : 114mm

Weight : 1.4kg

Delivery in France within 24 to 48H.

Locking C-Clamp with swivel pad from STRONG HAND. 

Overall length : 165mm / Throat depth : 45mm

Maximum clamping capacity : 50mm

Weight : 0.3kg

Delivery in France within 24H

Magnetic wedge/Angle magnet adjustable from 30° to 275° with two on/off switches, from the brand STRONG HAND. 

Dimensions: 197 x 197 x 95mm / Weight: 3.4kg

Traction force : 50kg

Pipe pliers with large V-bearings 28cm made of metal.

Wrist of the pliers made of alloy steel

Dimension: 3x3x3mm

Delivery in France under 24H

Deluxe model of welder's tongs/MIG pliers. Equipped with a chain. 

Dimensions : 25.4 x 10.16 x 2.54cm / Weight : 363g 

Country of origin : United States

A 50 micron aluminium foil, coated one side with a dispersion acrylic, pressure sensitive adhesive. The tape is backed with a strong, polyethylene coated release paper. 

Specification:

Test certificate available to show this foil tape meets the requirements of the following specifications:

• BS476 Part 6 and Part 7 Category 1
• Fire Class M1
• Class O  

Sold by the roll. 

Discover the classicgear polished chrome combination ratchet wrenches from EGA Master. They easily withstand the resistance values ​​of the most demanding quality standards.

With classicgear ratcheting combination wrenches, you have the possibility to tighten nuts more comfortably, even if access to the nut is difficult. And allows you a minimum working angle of 5º between the ratchet teeth, which guarantees maximum operability.

Delivery in France and Europe in 24h 48h.

Optimize your welding operations with the EWM Set Degauss 600 demagnetizer. Ensure maximum arc stability by eliminating residual magnetism and reducing rework for flawless results. Portable, robust, and easy to use, it guarantees optimal performance on-site.

Hold and align your workpieces with power and precision using STAHLWERK’s 4-piece magnetic welding square set. Strong, versatile, and built to last – an essential for every workshop.

Work faster and more accurately with this set of 6 STAHLWERK magnetic welding holders. Compact, powerful and multi-angle, they provide reliable grip at 6 fixed angles – ideal for welding, brazing, plasma cutting or pipe installation.

For marking large-diameter piping.
This cardboard tracing tape is heat resistant up to 176°C (349°F).

Ideal for piping work prior to welding.

Sold individually

Mark cleanly, quickly and with control thanks to this 150 mm carbide scriber. Its metal body provides a good grip, while its durable tip supports marking, fitting and preparation work in the workshop or on site. A simple, precise tool ready to become part of your workstation.

The 170 mm carbide scribe is designed for professionals looking for a long, robust and precise scribing tool for use in the workshop, on site or in industrial environments. Its design, combining technical plastic and carbide, provides a reliable grip, excellent resistance in use and consistent precision during marking, positioning or work on metal parts.

Improve visibility during every inspection with this 50 mm inspection mirror. Compact, practical and built for industrial use, it helps operators check hidden areas before, during or after welding and metalworking operations.

This versatile tool can be used as a graduated level or, with its accessories, to align double-drilled flanges.

Simple mechanic's square in ground milled steel, high quality, Ideal for checking the flatness of the surface and tracing right angles

Available in several sizes.

Mechanic's hat square screw in ground milled steel. Ideal for checking the flatness of the surface and tracing right angles.

Access hard-to-see areas instantly with this articulated magnetic mirror. Its strong magnetic base and flexible arm provide precise visibility in tight spaces. A smart tool to boost efficiency on every job.

Enhance your workshop visibility with this replacement magnetic mirror glass. A reliable solution to restore clear and precise vision in any situation. Order now to keep your performance at its peak.

STRONG HAND TOOLS magnetic square.

Able to hold metal parts at 45 or 90 degrees.

Dimensions: 11.1 x 9.5 x 2.5cm / Weight: 0.7kg

Made of metal / Sold individually 

Optional accessory for all MSA magnet squares.

Weight: 0.2lb / Maximum pull force: 16lb

Sold by set of 3. 

Adjustable angle square / wedge Pivot 200 MAGSWITCH offers an angle range from 22 to 270 degrees.

The Markal ST.2100 marker complies with European nuclear industry standards. It can be used safely on stainless steel. It is mainly used by nuclear power plants.

The marker is delivered with a PMUC certificate required and controlled by EDF, which includes a batch number to ensure product traceability.

The aluminium tube contains a thick paint that allows application to vertical surfaces.

Argweld® PMUC water-soluble purging film kit for creating a temporary gas-tight barrier inside pipes and reducing the volume to purge during welding in the nuclear sector.

The Markal Stylmark metal ballpoint marker is ideal for marking on most surfaces.

Thanks to its aluminium tube containing a thick paint, the marker can be applied to rough, vertical and overhead surfaces and has excellent adhesion to oily and damp surfaces.

To minimise health risks, the marker does not contain xylene.

Speed up your welds and cut gas costs with this all-in-one purge tool. Instant sealing, quick setup, and a professional-grade finish. Click to order now!

A fully integrated tool designed to save time and gas. The SC Profi provides fast, turbulence-free, airtight purging for pipe diameters ranging from 24 mm to 176 mm. Built for industrial performance, this kit includes everything needed for effective pipe purging and withstands up to 340°C for 1 hour.

Perfect for prefabrication and piping work in the workshop or on site.

Dimensions (metric) : 10 x 152 cm

Buy now and get your Delivery in France and Europe within 24  /48 H

Scribing tapePerfect for prefabrication and piping work in the workshop or on site.

Width: 12.7 cm, Length: 274 cm. Temperature resistant up to 177°C.

This product will save you time and improve accuracy in pipe marking work.

Available in other dimensions and resistance characteristics (T°).

Maximize your weld quality with the SC Profi – a complete, turbulence-free purge tool engineered for pipe IDs from Ø13 to Ø215 mm. Fast setup, perfect seal, immediate gas savings.

Optimize your pipe welds with the SC Profi Single. This high-performance purging system fits internal diameters from 13 to 43 mm. Its sintered metal diffuser and double or triple sealing lips ensure laminar gas flow and fast, turbulence-free purging. Ideal for TIG, MIG/MAG, and plasma welding.

Pipefitter's scribe tape. Perfect for prefabrication and piping work in the workshop or on site. Width: 12.7 cm, Length: 274 cm. Temperature resistant up to 287°C

Perfect for time saving and precision pipe marking work.

Available in other sizes and temperature characteristics.

Choose unmatched precision with the PurgEye® 200! This portable monitor measures residual oxygen from 1000 to 10 ppm, ensuring optimal purging for welding titanium, zirconium, and sensitive alloys. Compact, robust, and equipped with an electromechanical pump, it is the ultimate reference for demanding welders.

Optimize your weld purging process with the Complete Weld Purge Film™ Kit. This kit includes everything needed to create a tight barrier in your piping: a 20m² roll of soluble film, two bottles of super purge adhesive, and a precision cutter. Easy to use, residue-free, and effective up to 300°C, it ensures optimal purging even in hard-to-reach areas.

Optimize your leak-tightness tests with the orbital welding case and its pure Nylon 6 sealing plugs. Lightweight, durable, and easy to use, these plugs ensure perfect sealing even under pressure. Ideal for demanding stainless steel welders!

Enhance the quality of your pipe welds with the convex drag shield for manual welding. Designed to fit pipes with an inner diameter (ID) from 1" to 12", it ensures uniform gas coverage, preventing oxidation and delivering clean, bright welds. Ideal for TIG and plasma welding, it optimizes gas consumption and reduces post-treatment costs.

Optimize your pipe welding with the concave drag shield for manual welding. Designed to fit pipes with an outer diameter (OD) from 1" to 12", it ensures uniform gas coverage, preventing oxidation and delivering clean, bright welds. Ideal for TIG and plasma welding, it reduces gas consumption and post-treatment costs.

Optimize your TIG and plasma welding with the drag shield for flat manual welding. Designed to ensure uniform gas coverage, it prevents oxidation and guarantees clean, bright welds. Ideal for welding titanium, duplex steels, and reactive alloys, this drag shield reduces gas consumption and post-treatment costs.

Tempilstik is the go-to solution for fast, precise surface temperature control during your welding operations. Its reliability makes it an essential tool for demanding industrial environments.

Transparent flexible tubing coil 6.3x11 - L25m. Ideal for supplying inert gas (nitrogen, argon, compressed air, etc.) to tools or machines, or for purging, inerting, cleaning, and leak detection operations.

Price per meter, decreasing based on quantity — packaged in 25 m coils

Order in multiples of 25 only (e.g. 50, 100, 200 m)

High-density foam sheet – dimensions: 2 x 1 meter (2 m²) – Thickness: 40.0 mm

Product mainly intended for pipefitters. Easily cut to make plugs or discs for creating purging chambers of any diameter.

Easy to cut with a utility knife. Airtight and compatible with inert gases such as Nitrogen, Argon.

Sold per sheet

Inerting kit case DN15-150 Ø21-175mm for tube ½ "" to 8"" DOUBLE LIP washers.
This case contains a stainless steel cable, a stainless steel diffuser, and rolls of tape.

INCLUDED: transport box (480 mm x 380 mm x 170 mm).

The conical silicone plugs are designed to seal all types of tubes in counterbore or other applications from Ø4mm to 170mm. They can be used over a temperature range of -60 to 260°C, their hardness is 50° Shore.

Sold in bags of 10 for plugs from Ø6-10 mm to Ø27-34 mm. And in bags of 5 for plugs from Ø32-38mm to Ø46-55mm.

Available with or without central hole.

Color: Transparent or black.

Create reliable, long-lasting seals on insulation systems with AL053 aluminium adhesive tape. Its 50 µm aluminium backing, pressure-sensitive rubber adhesive and UL 723 certification make it a professional solution for sealing aluminium-faced ducts, pipes and insulation joints. The 50 mm x 50 m roll is ideal for installation, repair and sealing work on site or in the workshop.

Optimize your welds with our pipe purging system. Designed for ultra-fast and efficient purging, it reduces inert gas consumption while ensuring perfect sealing. Ideal for demanding welding professionals!

This inerting case effectively removes oxygen and harmful gases for high-quality welds on stainless steel and sensitive alloys. It ensures solid, defect-free, and aesthetically pleasing joints. Easy to use and essential for professional results.

This ready-to-use kit includes : Flexible unit 2 m with 1/4 "valve, one regulator and inflatable shutter ballon <Ø450 (18")

Select the right model according to the inner diameter of your pipeline.

Flame retardant cotton plugs provide protection during welding. These safety balloons are used to retain flow, but are not intended to retain pressure.

Input : 1/4" Gas Female. Diameters range from 1 - 14" (always in stock) and bigger (ask for quotation)

Need more information ? Feel free to call us.

Transparent PVC hose for any use with temperature between -15°+60°.

Suitable for the distribution of neutral gases such as Argon or Nitrogen.

The Argweld® PurgEye® 100 IP65 portable Weld Purge Monitor® measures from atmosphere (20.94%) to 100 ppm (0.01%) residual oxygen. It offers an instant, safe and accurate reading of residual oxygen.

Ideal for work on stainless steel, it allows to know when the inertness of the weld is good enough to weld. It allows to check that there is no loss of inertness during welding. The sensor has a lifetime of more than 18 months (an indicator will be displayed) and is replaceable by yourself, spare sensors are available.

This device has a calibration system that is activated by a button on the front panel.

12 mm F/F straight connector for PurgElite inerting tank essential for system operation.

It can also be completed with hose and a PurgeGate pressure regulator.

Pressure regulator compatible with PurgElite inerting tanks. required for system operation.

Prevents gas overpressure and risk of bursting of purge tanks.

Sold individually

Inflatable balloons for 1 - 14 inch pipe inerting.

Huntingdon Fusion Technique HFT® is re-launching a revolutionary inerting system with a new design that allows you to increase the quality of your welds at low cost. This new simplified design has significantly reduced manufacturing costs without compromising the quality of materials used in the manufacture of inflatable inerting systems.

The PurgElite® consists of two inflatable bladders covered with a flame retardant fabric, connected by a flexible hose that can withstand high temperatures.

Sold individually (consisting of 2 connected balloons). Delivered without accessories.

Order now and receive your product within 48/72 H in France and Europe.

The pipe stopper is used to temporarily prevent the flow of gas or liquid.

Quick and easy to install. The peripheral seal expands when tightened with the central screw. Steel body design for greater rigidity and durability.

Choose your plug model according to the internal diameter of the pipe.

Packaged individually.

Looking for a quick solution to create an inerting chamber in a pipe? Need an accessory that leaves no trace?

AQUASOL water soluble paper or rice paper for pipe fitters is used to create inerting chambers. Suitable for welding pipes (mainly stainless steel), it is widely used in the chemical, petrochemical, gas and district heating sectors.

Sold by the metre in 78 cm width.

Do you need to inert your pipes? Are you looking for a simple solution to hold your soluble paper in position?

The AQUASOL adhesive tape is totally water soluble. It allows to maintain the soluble paper on the inner walls of a stainless steel or steel pipe. Roll size 5 cm x 92 m.

Sold in rolls. 

Secure flexible ducts from 50 to 215 mm with this practical toggle-head clamp, designed for reliable installation in workshops and on industrial job sites. Compatible with P2100 GF ducting, it is a versatile solution for extraction, ventilation and industrial piping systems.

Keep your tools secure, sorted and easy to carry with the STAHLWERK stainless steel toolbox – tough, expandable, and built to last.

Keep your tools safe and organized with the SORI 600x350x350 jobsite box. Compact, ultra-durable, and fully made in France, it’s ready for all terrains.

Secure and carry your tools easily on any job site with the SORI CR500. Built tough and compact (500 x 250 x 250 mm), it's the trusted storage solution for professionals seeking reliability and mobility. 100% French-made, it’s built to handle tough conditions.

Store, transport, and secure your tools with the rugged CR570 SORI site chest – made for demanding work environments.

Durability meets efficiency: The STAHLWERK stainless steel toolbox is your compact, expandable solution for organized tool storage on-site or in the workshop. Built to last and easy to carry.

Standard model of multi-purpose welder's tongs / MIG pliers from Strong Hand Tools. 

Weight : 0.4kg / Length : 215mm

Delivery in France within 24H.

Robust parallel vice made of steel-reinforced cast iron, featuring a swivel base for optimal flexibility. Designed with a backlash adjustment system for enhanced precision. Jaw opening of 200 mm, jaw width of 200 mm, weight of 25 kg. *Shipping costs not included.

The BIM 733 T10 MS bandsaw blade is designed for precise cutting of steel, non-ferrous metals, and plastics. With a tooth pitch ranging from 1.8 to 2.5 mm and a bi-metal construction, it ensures high performance with low vibrations. Supplied in a pack of 3, it is ideal for materials with a tensile strength of less than 1,400 N/mm²

The PIPERACK PR1 is built to organize long materials efficiently on site. Strong, mobile and foldable, it features 3 storage levels, a 1000 kg WLL, integrated handles and 4 extra-heavy-duty 6" castors for smooth movement.

The ABAS 18-63 AS cordless band saw delivers exceptional cutting performance with its 63.5 mm cutting depth. Compact, ergonomic, and compatible with AMPShare ProCORE 18 V batteries, it enables precise and flexible cutting of various materials (steel, aluminum, plastic). Ideal for mobile work with optimal comfort, it features an LED light and a quick, tool-free blade change system.

Designed for demanding professionals, the STAHLWERK CROW tool trolley is a fully equipped mobile workstation featuring 235 high-grade chrome-vanadium tools. With 7 ball-bearing drawers, lockable system, and long-life rubber wheels, it delivers strength, mobility and precision in every workshop or on-site job.

The ASAS 18-21 K AS reciprocating saw is an essential tool for efficient and versatile cutting of various materials, especially in hard-to-reach places. Thanks to its compact design and low vibration, it is perfect for mobile use while ensuring comfortable and precise work.

Power, durability, and mobility combined – the STAHLWERK PHOENIX trolley is the ultimate choice for demanding professionals. Equipped with 7 drawers and 262 chrome-vanadium tools, a built-in paper roll holder, and a highly modular layout, it turns any workshop into a streamlined, efficient workspace. Order your all-in-one workstation now.

The CCG 18-125-12 PD AS Set ProCore is a Ø 125 mm cordless angle grinder designed for fast and efficient cutting with a powerful, dust-protected Power Drive FEIN motor. Compatible with AMPShare ProCORE 18 V batteries, it delivers performance equivalent to a 1,200 W corded tool. Featuring COOLPACK 2.0 technology, it extends battery life while providing 87% more power than conventional batteries. Its ergonomic design with an anti-vibration handle ensures optimal comfort.

XXL professional workshop cart with 12 drawers, 364 chrome-vanadium steel tools, long-life rubber wheels, central locking system and modular workspace. The ultimate setup for a fully optimized workshop.

The CCG 18-115-12 PD AS is a cordless angle grinder Ø 115 mm, ideal for intensive cutting, grinding, and deburring tasks. Featuring a durable Power Drive FEIN motor with the same power as a 1,200 W corded tool, it is compatible with ProCORE 18 V batteries for maximum performance. It offers dust protection and an advanced cooling system. Enhanced ergonomics, with an anti-vibration handle and soft start, ensure comfort and safety. Perfect for mobile work with its L-BOXX system.

The STAHLWERK RB-110 ST roller trestle is a folding, height-adjustable work support from 720 to 1,100 mm, ideal for machining long parts. Its sturdy steel frame supports up to 60 kg, featuring a smooth 30 cm roller and foldable safety wings. Lightweight, stable, and foldable, it saves space and provides excellent maneuverability for all workshops.

The F-IRON Cut 57 AS is a compact cordless circular saw, designed for fast and precise cutting of metal sheets, tubes, and profiles up to 57 mm deep. Featuring a brushless motor and ProCORE 18 V battery, it delivers 50% more power than traditional manual saws. Lightweight and easy to handle, it weighs just 3 kg, with a durable aluminum housing and secure chip collector. Compatible with Makita, BOSCH, Festool, and Mafell guide rails.

Free your teams from cable constraints with the PipeCut 170 Battery, the cordless pipe saw designed for worksites, workshops and mobile operations. Compact, lightweight and powerful, it delivers clean cuts on pipes up to 170 mm across a wide range of materials.

Optimize the handling of your pipes with the CRICKET tube cart. Designed to support up to 450 kg and pipes up to 6.1 m in length, it ensures stable and secure transport thanks to its Runflat tires and lever mechanism that facilitates lifting. Ideal for construction sites, it combines robustness and maneuverability for significant time and effort savings.

Optimize the hold of your clamps with Replaceable Pads, standard spring-loaded pads designed for light and medium-duty applications. A reliable solution to maintain accuracy, extend the service life of your equipment and secure your clamping operations in the workshop.

he Cut&Bevel 190 blade delivers flawless cutting and bevelling of plastic pipes in one effortless process. Designed for use with the P1000 machine, it handles plastic materials up to 40 mm thick. It features reversible bevelling tips to ensure consistent precision and an extended blade life.

Polyethylene rollers for V-head - single unit

Each package includes a V-Pad and an extension block, along with mounting screws. Easily transform your F-clamps into 4-IN-1 clamps by mounting the V-Pad or extension block onto the threaded hole of the F-clamp.

Achieve a flawless finish with one effortless process: the Exact Cut&Bevel 148 blade allows you to cut and bevel plastic pipes in a single, high-speed step.

Polyethylene rollers for V-head - single unit

The ratchet mechanism ensures rapid, vibration and torsion-resistant clamping.

• Quick to set up, unlock, and remove in high-volume clamping applications.
• Even clamping pressure. Ideal for repetitive clamping setups.

For precise, comfortable, and fatigue-free work with a reciprocating tube saw. This clamping device provides stable tube positioning during both straight and miter cuts.

Double pipe support designed for diameters from 50 to 1000 mm. 130 kg load capacity with dual plastic rollers for enhanced stability and ease of use.

Heavy-duty 76 mm J-shaped throat for over-the-edge applications.

Capacity: 254 mm - Clamping force: 454 kg - Rail size: 22 x 11

FEIN PCS 1000 E reciprocating saw – Precise, spark-free cuts. Designed for pipes and profiles up to Ø 400 mm, this high-performance saw ensures maximum safety in demanding industrial environments.

HD FEIN blades for steel and stainless steel – Ø tubes up to 260 mm. Available in two toothings (2.1 mm and 3.2 mm) depending on the type of cut desired. To be used with the FEIN clamping device or guide.

Lightweight and compact pipe support, ideal for handling pipes from 50 to 1000 mm in diameter. 65 kg load capacity with plastic rollers for smooth and protected rotation.

The ratchet mechanism ensures rapid, vibration and torsion-resistant clamping :

• Quick to set up, unlock, and remove in high-volume clamping applications.
• Even clamping pressure. Ideal for repetitive clamping setups.

For precise, comfortable, and fatigue-free work with a reciprocating saw for tubes. This blade guide ensures stable and accurate cuts through to the tube center.

HD FEIN blade for steel and stainless steel – up to Ø 325 mm. Use only with saw blade guide 9 06 06 002 009. Durable and efficient cutting.

Transport roller for pipes up to 900 mm in diameter, designed to support heavy loads of up to 1,000 kg. Durable and sturdy with thick rollers and a galvanized steel frame.

Perfect for machining larger flat and round materials with a diameter of up to 100 mm. |Only compatible with the FEIN VersaMAG vice.

For precise, comfortable, and fatigue-free work with a reciprocating saw for tubes. This clamping device is designed specifically to hold profiles securely during cutting.

HD FEIN blade for steel and stainless steel. Cuts pipes up to Ø 350 mm, Ø 440 mm only with chain extension, chain, and bolt.

Robust transport roller for pipes up to 650 mm in diameter, supporting heavy loads of up to 1,000 kg. Equipped with wide rollers and high-quality ball bearings for secure handling.

Durable welding plate 250 x 250 mm with 16 mm drilling, high surface protection, and template for Demmeler and Siegmund elements. Compatible with the FEIN VersaMAG permanent magnet (32172050020).

For precise, comfortable, and fatigue-free work with a reciprocating saw for tubes. This clamping device ensures stable tube holding for clean, controlled cuts.

HD FEIN blade for steel and stainless steel – pipe Ø up to 170 mm. 300 mm length, 1.6 mm spacing. Use with fixture 9 07 02 005 00 0 or 9 07 02 004 00 6.

Pipe transport roller for pipes up to 315 mm in diameter, supporting up to 200 kg. Compact, lightweight, and equipped with high-quality ball bearings for optimal handling.

Ø 355 mm saw blade designed for clean and consistent cutting of structural steel. With 66 teeth and a 2.2 mm thickness, it delivers precision, stability and performance for workshops, job sites and demanding industrial environments.

For precise, comfortable, and fatigue-free work with a reciprocating saw for tubes. This device enables controlled feeding and secure clamping during cutting operations.

HD FEIN blade for steel and stainless steel. Extended use and high output. Pipe cutting up to Ø 440 mm (with chain extension).

The Heavy Duty tube stand is designed for large-diameter tubes, allowing for simple, quick, and secure placement and alignment. These stands can accommodate tubes up to 900 mm in outer diameter and a weight of 2,725 kg. Foldable, they are suitable for use both in the workshop and on-site.

The MKAS 355 pendulum metal saw combines efficiency and safety, providing fast and precise cuts with minimal sparks and dust thanks to its low-temperature cutting technique. It features easy adjustment of the cutting angle from 0 to 45 degrees for customizable miter cuts. Equipped with a quick-clamping device, an adjustable depth stop, and a chip collector, it ensures clean and precise work. The "dead man's switch" enhances user safety. Ideal for professional metal cutting.

FEIN blade for polyethylene pipes and aerated concrete up to Ø 380 mm. Length 530 mm, 6.3 mm tooth spacing. Use only with guide 9 06 06 002 00 9.

Cut with confidence, even in the most sensitive environments. The FEIN STS 325 R pneumatic saw delivers fast, spark-free cold cuts, ideal for pipes up to 440 mm and profiles up to 290 x 500 mm. Order now and stay safe on every job.

Improve the handling of pipes, tubes and metal profiles with this stainless steel head. Designed for workshop pipe stands and trestles, it provides smooth rolling support, precise height adjustment and outstanding durability for demanding industrial applications.

Compact and powerful angle grinder, 1,500 W, with "dead man's switch" and encapsulated, brushless FEIN PowerDrive motor, for efficient grinding, cutting, and deburring work in a dusty working environment.

FEIN saw blade for polyethylene pipes and aerated concrete. HSS material with 6.3 mm tooth spacing for effective cutting.

The Exact PipeCut 220E is a powerful and robust pipe saw with a wide cutting capacity, perfect for cutting metal and plastic pipes. With adjustable motor speed and constant torque, it is ideal for use in workshops and on-site. Designed for versatility in various pipe applications, it’s a must-have for professionals.

Optimize your welding operations with our quick-change rollers designed for the Twin Stand. Each set of rollers supports a capacity of up to 900 kg. Thanks to a one-wheel mechanism, no additional tools are required for assembly. The rollers are pre-mounted in quick-change housings, ensuring easy and fast installation.

The new FEIN VersaMAG system brings a new dimension of flexibility to the world of clamping. The powerful permanent magnet forms the basis of the FEIN VersaMAG system.

Thanks to the permanent magnet with vise, the vises are no longer attached to the work table, but can be used where quick clamping previously posed a great challenge: on construction sites and in workshops, on vertical planes — and especially for small, quick tasks.

Simple. Mobile. Flexible. It's the perfect solution that combines excellent holding power with rapid results.

FEIN saw blades designed for fast cuts in aluminium and plastics. Available in 200 mm and 400 mm lengths, with wide 3.2 mm (8 TPI) tooth spacing for optimal chip removal.

The Exact PipeCut 170E is a powerful, lightweight, and versatile pipe saw designed for cutting both metal and plastic pipes. With adjustable speed and constant torque, it is ideal for cutting stainless steel, cast iron, and other materials.

The Twin Stand is a height-adjustable tube welding stand, ranging from 80 cm to 130 cm, with a capacity of 2,000 kg. Its wide handles and brake ensure safe handling, even with gloves. The rollers, available in steel, rubber, or stainless steel, are sold separately and available on our website.

EGA Master Reversible Chain Wrenches: Robust and versatile tightening tools, ideal for tight spaces and demanding applications.